Print The Porto

A collection of tips about 3d printing.

August 2015

Posts 1 to 3 of 3

0

Increase printing speed

Great forum post on http://www.printrbottalk.com/forum/viewtopic.php?f=15&t=1124 Most relevent post:… View More

0

How to calibrate your 3d printer Extruder Steps

Step 1 Enter M501 in the control software of your choice. This will show the current stored settings on your firmware. The section we are looking for begins with, M92. This sets the number of steps which, in turn controls the accuracy of our printer. To Calculate Accurate… View More

0

Calculate and configure Accurate E and Axis Steps for printrbot simple

The section we are concerned with, is the line that begins M92. This sets the number of steps which, in turn controls the print accuracy of a 3d printer. To Calculate Accurate Steps ( Distance to Travel / Distance Traveled ) * Number of Configured Steps For example, on the X axis (40 / 39.90) * 84.40. This gives new steps of 84.612 ( we only need a few… View More