Print The Porto

A collection of tips about 3d printing.


Posts 11 to 11 of 11


How to pause printing to switch filament in simplify3d

This is a how to guide is written to show how to switch filament in Simplify3D, you can use the original gcode in other slicers as well. Switching GCode This gcode can be used in any slicer, or placed manually in the gcode file before the layer you want to switch. G91 ; Set to Relative Positioning G1 Z100 F6000 ; Lift the nozzle 100mm along Z axis, at speed of 6000mm/min G1 E-200 F6000… View More