Print The Porto

A collection of tips about 3d printing.

e3d

Posts 1 to 2 of 2

2

Updating your Printrbot firmware to use e3d v6 thermistor

I wanted to update to the firmware on my printrbot simple metal to the latest as of this writing (August 7, 2015), for the Rev F version 5 boards on Mac osX. Here's a handy download of the simple metal hex file. There is a excellent write up on the whole process at… View More

0

e3d volcano hot end tips

Getting good prints with a e3d volcano hot end can be very tricky. But I've figured out a couple of base rules to follow that can help with printing. For my example, we'll be using a 0.8mm nozzle/width. Step right or step off First thing first, this guide is totally useless if you haven't properly calibrated your extruder steps. I explain how to easily do that… View More